1. Home
  2. Author: WEIDA

All posts by: WEIDA

About WEIDA
November 21, 2011

Ceramic roller production line

Basic technological process for ceramic roller production line Raw material→ball mill→vibrating mesh→slurry pool→pneumatic diaphragm pump→iron remover→slurry pool→plunger pump→filter press→vacuum pug mill→homogenizing→vacuum extruding press→cutting-manpower fix drying car→dryer→chamber→firing→cutting pipes→stiletto ends and grinding→inspection-packing and warehousing S/N    Model                            Qty 01     Ball mill TQ-1                      3 Sets 02     Ball mill TQ-3                      2 Sets 03     Inspection machine                  1 Set 04     Screw mixer […]

Others
November 21, 2011

Clay brick production line

Weida fired clay brick (red brick, hollow brick, facing brick) production line adopt the most advanced auto production equipment and technology of world, compared with conventional red clay brick  production line, it is characterize as below: Clay brick production process realized full automatic, material batching ration, mixing water ration, kiln car enter and firing is […]

Clay brick
January 13, 2011

Terracotta facade complete production line

Terracotta facade is new environment-friendly and energy conservation curtain walls, it use nature terracotta as main material, per wet method extruding, cutting and drying, at last formed after sintering around 1200°C , Terracotta facade panel is characterized by bellows: 1 heat insulation and energy conservation: terracotta facade as a hollow ceramic board, have good heat […]

Terracotta facade panel
September 11, 2010

Split tile production line

Split tile is a kind of high class wall and floor extruded tile featured very high artistic quality, it take plastic clay as main raw material, adopt wet-method vacuum extrude forming, per drying and sintered in high temperature, widely used in school, hospital, traffic station and other public building, villa for wall and floor decoration. […]

wooden type brick
August 23, 2010

Ceramic tile production line

Dry-body preparation is a sustainable technology for ceramic tile powder preparation. WEIDA Dry-body preparation technology featured advanced production technology, economical investment, energy saving and environment friendly, its main technical index meet and partial exceed world level, it is a significant technological breakthrough and revolution on ceramic wall and floor tile industry, it will be a […]

Ceramic Tile
August 23, 2010

Clay roofing tile production line

WEIDA complete set glazed clay roofing tile production line is characterized by high automation, advanced technology, fluid whole production process; the degree of automation could completely compared with the same kind clay roof tile production line of developed countries while the price is just 1/3 of theirs, thus be much appreciated by customer both home and […]

Clay Roofing Tile
  • 1
  • 2